China’s solar and storage industries, connected to the world.
Sourcing supportEnglish

Analysis & opinion

Suzhou Kailong explains insulation, sealing and thermal-runaway protection for storage batteries

In this November 13, 2026 interview, Zhang Yong describes Kailong's thermal-management materials and the different priorities of utility, commercial and residential storage. Performance, customer and standards statements remain the interviewee's claims.

The energy-storage industry is used to putting competitiveness into specification tables: energy density, cycle life and system cost. But some value cannot be captured in a specification table. Take a thermal-insulation pad. In the minutes after thermal runaway begins, how much warning and response time it can gain for the system often determines where the incident stops spreading and how much response time remains.

Suzhou Kailong Electronics has spent more than a decade making such materials. Nano-insulation pads, silicone foam and insulating Mylar sheets are hidden deep inside battery packs, usually unnoticed, yet layered throughout the thermal-runaway protection system as ‘invisible lines of defence’. They do not stand in the spotlight, but at critical moments they must block heat, maintain insulation and ensure sealing.

In Kailong's view, energy-storage safety has never been something one component can solve on its own. It results from the combined action of multiple material layers for thermal conduction, thermal insulation, electrical insulation and sealing. Kailong's task is to get these inconspicuous but critical details right, layer by layer.

Transferring technical capabilities to a new application

Kailong began in 3C electronics. Thermal-conduction materials used in mobile phones and networking products face demanding requirements and rapid iteration, and Kailong built a mature production system in this field. As the new-energy and storage markets emerged, Kailong moved into energy storage.

Discussing Kailong's development, Zhang Yong first turned back to 2002. That was when Kailong entered new-energy materials; since then, the company has accumulated more than twenty years of experience in material systems. Even narrowing the focus to storage-safety materials, Kailong has concentrated on this field for many years. In Zhang Yong's view, moving from 3C into new energy was not an improvised ‘cross-sector move’, but rather a natural extension of long-refined material systems and process capabilities into a new arena—the foundation and expertise remained the same; only the application changed. ‘Mobile phones already use thermal-conduction materials, and phones demand a lot from materials and iterate quickly. Extending the material systems and process capabilities we accumulated in 3C into new energy is more about reusing capabilities and adapting them to the application,’ Zhang Yong said.

This technical confidence comes from Kailong's long-standing ability to integrate material systems. For storage applications, Kailong has developed four functional material areas—thermal conduction, thermal insulation, electrical insulation and sealing—all within thermal-management materials. From thermal insulation between cells to sealing and heat dissipation in packs, and on to rack and enclosure levels, Kailong's materials run through numerous details of the battery system.

The material landscape behind an integrated solution

Many people's first thought when thermal insulation is mentioned is aerogel. But in Kailong's system, aerogel is only one option. For storage applications, Kailong does not rely on a single material, instead developing multiple technical routes in parallel. Basalt materials, nano-panels, mica sheets and PC serve different performance and cost ranges. Mica sheets are relatively low-cost and suit cost-effective applications; aerogels and nano-panels offer better performance at higher prices. Kailong matches solutions to the customer's product characteristics, performance requirements and cost range.

‘What we provide is an integrated solution for the entire thermal-insulation layer,’ Zhang Yong emphasised. Kailong is not a single-material supplier; it integrates multiple details of thermal conduction, thermal insulation, electrical insulation and sealing to help customers solve system-level problems.

Within this solution, Zhang Yong used three representative products to explain how Kailong divides the work among its materials. Nano-insulation pads guard against propagation—when an individual cell undergoes thermal runaway, high-efficiency insulation materials establish a thermal barrier between cells, gaining valuable time for system warning and response. Silicone foam guards sealing and cushioning—combining sealing, cushioning and thermal insulation within the pack so that the structure remains stable over time amid vibration and temperature differences. Insulating Mylar sheets guard electrical safety—providing reliable electrical insulation for the battery system. The three products each perform their own role, all toward the same goal: stopping risks at an early stage and keeping safety within the battery pack.

This solution capability is particularly evident across storage segments. The priorities differ by segment, Zhang Yong said: ‘Utility-scale storage focuses more on fire protection and thermal insulation, controlling heat propagation at high energy densities and large system scales; commercial and industrial storage focuses more on sealing and thermal conduction, taking the cabinet environment and long-term stability into account; residential storage places higher demands on low weight, compact size and installation compatibility.’

Standards first, with involvement from the design stage

Kailong's customers include Huawei-related companies, Desay, Changhong, Daqin and other storage companies. These customers are increasingly taking their storage products overseas, placing higher demands on materials suppliers' ability to adapt to standards.

Zhang Yong said Kailong designs and validates its products in accordance with UL, IEC and the relevant safety standards of customers' target markets, and works with customers to complete certification, adapting to requirements in Europe, North America, the Middle East and other target markets. ‘Our customers may be in China, but their products are going overseas, especially residential storage, which all goes overseas. So we have to meet the requirements of overseas target markets, not just Chinese standards.’

Competition in the utility-scale storage market is intensifying. Major cost items such as cells remain under pressure, and although thermal-insulation materials account for a small share of system costs, they too face downward pricing pressure. Zhang Yong said frankly that Kailong's response is not simply to cut prices, but to move upstream—from straightforward die-cutting in the past to involvement in customers' early-stage solution design, cost optimisation and system-level design. ‘Thermal-insulation materials account for a small share of system costs, but they are critical to battery safety, life and thermal-runaway protection. They cannot be treated as a minor matter,’ he added.

Invisible protection, visible long-term commitment

The thermal-insulation materials industry faces an awkward situation: its products are hidden deep inside battery packs, their protective effects are not normally perceptible, suppliers make their own claims, and buyers find it hard to distinguish between them. That is precisely why competition in this field is about time, not noise. Those who deepen their material systems, solution capabilities and adaptation to standards are the ones who can endure through customers' repeated validations.

Kailong's years of work have gone into these ‘invisible places’. From 3C electronics to new-energy storage, from straightforward die-cutting to involvement in early-stage solution design, and from meeting domestic standards to adapting to target-market requirements in Europe, North America and the Middle East, the company has not told many stories; instead, it has built its expertise one material layer and one detail at a time. Thermal insulation, cushioning and electrical insulation each guard a different point, stopping risks at an early stage and keeping safety within the battery pack. This may be the simplest expression of long-term commitment in an ‘invisible field’.

Related products

Browse product categories

Related reading

All news