China’s solar and storage industries, connected to the world.
Sourcing supportEnglish

Analysis & opinion

Copper electroplating for PV cells: August 2023 report text excerpt

Report text excerpt from August 23, 2023: two complete public paragraphs discuss expected copper-plating cost and efficiency gains, pilot-line development and competing process routes. The 2023–2024 outlook remains a historical forecast; the later 20 image-preview pages and underlying full report/PDF are not included.

Industrial cooperation is strengthening and pilot-scale validation is accelerating. Compared with screen-printed silver paste, copper-electroplated cells are expected to reduce costs by RMB 0.06–0.08/W and improve efficiency by 0.3%–0.5%. Against pressure from silver-price fluctuations, the long-term development prospects for copper electroplating are promising. Some pilot lines in the industry are gradually maturing, although costs, capacity and yield still need optimisation. Industrial-chain cooperation has strengthened since the first half of 2023, pilot-scale validation is expected to accelerate from the second half of 2023, and small-batch mass production is expected to begin in 2024.

Technical solutions are becoming more diverse. Seed layers: full-surface seed layers are currently mainstream; localised seed layers involve simpler steps and less waste liquid, while seed-layer-free approaches offer significant cost advantages. Patterning: in the early stages of industrialisation, wafer sizes and grid-line designs are prone to change. Benefiting from faster pattern editing, direct-write lithography leads in industrialisation, while mask lithography is being developed at an accelerating pace; the long-term focus is on cost-reduction progress for both. Inkjet printing offers cost and environmental advantages, but equipment solutions still need to mature. Ink is an important factor affecting grid-line width and uniformity, and PV applications face two major challenges: textured surfaces and cost reduction. Electroplating: electroplating is currently an industrial bottleneck, with capacity and quality affected by electrical, chemical and mechanical factors. For electrical solutions, current density is the primary parameter and, within a certain range, is proportional to electroplating capacity. For chemical solutions, PV electroplating and conventional electroplating do not fundamentally differ in plating-bath formulation; in early industrialisation, participants are accelerating detailed optimisation. Mechanical solutions affect not only yield and footprint but also electroplating capacity. As electrical and chemical solutions gradually stabilise, the contribution of plating time to increasing throughput is gradually declining, and transfer time has become an important factor affecting electroplating capacity. Other electroplating approaches: the challenge in TOPCon electroplating concerns the pull strength of nickel plating, while BC electroplating has greater tolerance for shading.

Related products

Browse product categories

Related reading

All news