China’s solar and storage industries, connected to the world.
Sourcing supportEnglish

Technology

Yunnan perovskite team reports 27.16% small-cell efficiency and pilot-validation progress in August 2026

The August 11, 2026 account distinguishes certified small-area single-junction efficiency of 27.16%, small-batch process validation for a 661 cm² active-area module and 22% efficiency for 30 × 30 cm modules. Efficiency above 24% is a next-stage module target, not an achieved production result.

Recently, Kunming Ligong Hengda Technology Co., Ltd., an enterprise in the Kunming National Hi-Tech Industrial Development Zone, and Professor Huang Hui's team at Kunming University of Science and Technology jointly achieved a breakthrough in perovskite solar-cell research and development. According to the team, certified efficiency for small-area single-junction devices has reached 27.16%, and the fabrication process for modules with an active area of 661 cm² has completed small-batch validation. The team has now provisionally selected a formulation for pilot validation and begun assessing key stages of the pilot process, as the technology moves from laboratory research towards pilot validation.

To address engineering challenges facing perovskite solar cells as they move from the laboratory towards industrialisation, including efficiency loss on area scale-up and control of film uniformity, the project team established an industry-university-research consortium and a dual-track technical approach combining ‘fundamental research’ with ‘engineering scale-up’. The team continues to iterate material and interface systems for small-area devices while working with module manufacturers to overcome challenges such as large-area coating processes. It has now achieved stable fabrication of 30 cm × 30 cm perovskite modules with a conversion efficiency of 22%; the next objective is to raise module conversion efficiency to above 24%.

The results mark progress in efficiency, stability and cost. At the materials level, the team pioneered a strategy for jointly suppressing bulk and grain-boundary defects. Devices with a bandgap of 1.53 eV achieved 26.84% efficiency, while 1.66 eV devices achieved 24.12%; the devices retained 94% of their efficiency after 1,000 hours of continuous operation at the maximum power point. In interface engineering, optimisation of the buried interface and suppression of non-radiative recombination losses enabled devices to retain 96% of their efficiency after 1,200 hours. In electrode processing, the team introduced co-evaporated silver-copper alloy electrodes to reduce precious-metal use and conducted research on low-temperature brush-coated electrode fabrication processes suited to large-area roll-to-roll production.

Related products

Browse product categories

Related reading

All news