Technology
Laser-assisted firing for TOPCon, PERC and xBC cells — September 2023 text excerpt
This September 22, 2023 text excerpt translates the public technical-summary heading and all five numbered points on laser-assisted firing, passivation, contact resistance and silver-paste matching. It does not translate the 21 subsequent slide-preview images or claim a complete presentation/PDF; its development-stage statements refer to 2023.
Technical summary:
1. Laser-assisted firing essentially uses the highly concentrated and controllable energy of a laser to separate two key steps in high-temperature firing—passivation-layer erosion and contact formation—thereby enabling further precise control of the firing process.
2. In principle, the current generated by the laser travels along low-contact-resistance paths, triggering silver-silicon interdiffusion and thereby reducing contact resistance. The duration of the entire firing process is matched to the carrier lifetime, and it stops rapidly after the laser has passed. This maximises retention of the original passivation layer and avoids carrier recombination caused by direct contact between the metal and the silicon substrate.
3. Laser-assisted firing is suitable for all firing processes using high-temperature fire-through silver pastes, and therefore has application potential for PERC, TOPCon and even xBC cells. For TOPCon cells, because fire-through pastes are used on both the front and rear sides, the potential efficiency improvement from laser-assisted firing is greater than for PERC cells. It is worth noting that precise control of the firing process through laser-assisted firing makes it easier to thin the rear-side polysilicon of TOPCon cells, opening another avenue for efficiency improvement by reducing parasitic absorption.
4. In supporting materials, the use of silver pastes specifically designed for laser-assisted firing can provide additional efficiency gains. As laser-assisted firing technology becomes more widely adopted, manufacturers that are first to introduce volume-production silver pastes for laser-assisted firing are expected to gain a greater market share.
5. At the current stage, leading laser-equipment manufacturers are accelerating the introduction of related products, but their effects are mainly concentrated on the front side of cells. With further accumulation of technology and experience, the contribution of laser-assisted firing to TOPCon rear contacts and polysilicon thickness reduction remains to be explored.




